Signal Strength Problems on SAT 101


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: Satellite TV Forums: Pay TV Systems: Direct TV Forum:
Signal Strength Problems on SAT 101

Print Thread

JWolfe
New User

Oct 23, 2005, 11:45 AM

Post #1 of 4 (618 views)
Shortcut

Signal Strength Problems on SAT 101	Can't Post

I have an oval dish with 3 LNB’s and I’m having signal strength problems with SAT A (101). On some Transponder I receive a far to good signal, up to 85 on the meter, while on others there is little to no signal. These are active channels. It would seem logical to have a variation on the signal but I doesn’t seem logical to have some LNB’s on the same SAT to have no signal. Any thoughts?

TANK1
Enthusiast

Oct 23, 2005, 5:52 PM

Post #2 of 4 (611 views)
Shortcut

Re: [JWolfe] Signal Strength Problems on SAT 101 [In reply to]	Can't Post

Some of the transponders are for local channels,and you would get little or no signal from them.

Are you missing any channels?

JWolfe
New User

Oct 25, 2005, 8:43 AM

Post #3 of 4 (604 views)
Shortcut

Re: [TANK1] Signal Strength Problems on SAT 101 [In reply to]	Can't Post

The channels I am having a problem with are not reserved for local channels, they are active channels.

TANK1
Enthusiast

Oct 25, 2005, 9:01 AM

Post #4 of 4 (602 views)
Shortcut

Re: [JWolfe] Signal Strength Problems on SAT 101 [In reply to]	Can't Post

Try rebooting the reciever.Unplug it for 10 minutes and then fire it up.

If you lost signal strength on all even or all odd transponders,it could be a bad or loose connector on the rg-6 coax cable or bad lnb.

Are you splitting the cable to other tvs?

If you had no signal problems before,then it proably isn't the dish allignment unless you think something made it move.

Print Thread

Search for (options)

Web Design by Web Ideas - Page loaded in: 0.11 s on (CGI/1.1)