jdragun
New User
Jun 5, 2012, 3:22 PM
Post #1 of 3
(2427 views)
Shortcut
|
Vizio VT470M blowinf T-con board chip
|
Can't Post
|
|
Where do I start the diags on this one. Anyone know what would cause the T-con board to blow a chip? I put in a new board (The pic was classic bad T-con board), it started up worked for about 8-10 seconds, then smoke and fried the same chip as the old t-con board. Could it be the main board is passing to much voltage to the t-con, or the power supply putting out to much power and that is the first weakest chip? where do I test on this to get voltages. Thanks all John
|