Sony TV PDM4210 slow to come on


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: Plasma TV Forum:
Sony TV PDM4210 slow to come on

Print Thread

Longtec
New User

May 29, 2015, 3:10 PM

Post #1 of 9 (3226 views)
Shortcut

Sony TV PDM4210 slow to come on	Can't Post

I have this TV for quite some time.

After switching on, it takes longer than usual to come on, I think about 15 to 20 seconds, and I suspect a component on the Power Supply is faulty, so I want to remove the Supply Unit.

I have removed the base stand, difficult because the screws were fitted with thread locking solution.

At this point it seem to me that, to get to the Supply Unit, I will have to remove the complete back cover, 20 screws.

Can someone who knows, please let me know if that is what I need to do.

Thanking you all for your help.

Longtec

jts1957
Veteran

May 29, 2015, 6:28 PM

Post #2 of 9 (3217 views)
Shortcut

Re: [Longtec] Sony TV PDM4210 slow to come on [In reply to]	Can't Post

More than that for rear cover (unless some jumped ship):
20 of one type
8 of a second type &
2 of a third type
All this after removing the Stand. (NOT this one: http://www.imdb.com/title/tt0108941/ )

http://elektrotanya.com/...sm.pdf/download.html

-------------------------
Location: Far, Far Away

(This post was edited by jts1957 on Jun 8, 2015, 9:43 AM)

Longtec
New User

May 30, 2015, 3:05 PM

Post #3 of 9 (3205 views)
Shortcut

Re: [jts1957] Sony TV PDM4210 slow to come on [In reply to]	Can't Post

Hi

Many thanks for your help.

I will make use of the info and update.

Longtec

Longtec
New User

May 31, 2015, 8:48 PM

Post #4 of 9 (3182 views)
Shortcut

Re: [Longtec] Sony TV PDM4210 slow to come on [In reply to]	Can't Post

Hello again

On this model I have removed

20 of one type
4 of one type
2 of one type (large, with holes to insert tool)
1 of one type (small)

I am unable to pull the cover off.

Any idea how to, please ?

Longtec

jts1957
Veteran

Jun 1, 2015, 12:45 AM

Post #5 of 9 (3179 views)
Shortcut

Post deleted by jts1957 [In reply to]

Longtec
New User

Jun 5, 2015, 7:42 AM

Post #6 of 9 (3079 views)
Shortcut

Re: [jts1957] Sony TV PDM4210 slow to come on [In reply to]	Can't Post

Hi

Still cannot remove back panel.

I took a photo of the TV back panel, but the site does not allow me to send an attachment.

I will try another method.

Longtec

Ron.M
Veteran

Jun 6, 2015, 4:24 PM

Post #7 of 9 (3057 views)
Shortcut

Re: [Longtec] Sony TV PDM4210 slow to come on [In reply to]	Can't Post

Longtec;...

Try this;=>..

http://www.tv-forums.com/...g=imageshack;#157911

Pay CLOSE attention to these 2 parts;=>...

Quote
Before you post the pix in the thread , go to the "Preview Post"
button at the bottom center where you are making your post & click
on that one time....
Wait for it to load the post...
Scroll up & check your post & pix...
If the pix is too small or too big , go back to imageshack
(or photobucket) & make the needed adjustments....
PLEASE DON"T post pix we need an IMAX monitor to view....
&
The above method is for "Advanced Editor"ONLY !!!
You can NOT paste in the "Basic Editor" mode...

Good Luck...

Later...Ron.M... Cool

..
Veteran & Retired TV technician

Longtec
New User

Jun 8, 2015, 7:49 AM

Post #8 of 9 (3027 views)
Shortcut

Re: [Ron.M] Sony TV PDM4210 slow to come on [In reply to]	Can't Post

Ok, thanks for your response.

Hope this comes through

http://imagizer.imageshack.us/v2/800x600q90/633/x9bpzC.jpg
http://imagizer.imageshack.us/v2/800x600q90/661/6ZzLT3.jpg

Longtec

jts1957
Veteran

Jun 8, 2015, 9:35 AM

Post #9 of 9 (3020 views)
Shortcut

Re: [Longtec] Sony TV PDM4210 slow to come on [In reply to]	Can't Post

Either too much par-tay-ing, or my meds have been tampered with or Ron's 'brain farts' are movin' east.

Yamaha? ... Sony? Aren't they all the same? ... NO!

See corrected info above.

-------------------------
Location: Far, Far Away

Print Thread

Search for (options)

- Page loaded in: 0.15 s on (CGI/1.1)