Spuded
New User
Nov 21, 2010, 9:19 AM
Post #1 of 3
(3106 views)
Shortcut
|
Convergence problem on LG
|
Can't Post
|
|
Hi all, I have a LG TV that has a convergence problem but I can't get into the convergence settings, It has an auto convergence feature that can be enter also. MODEL #: RT-56NZ23RB CHASSIS #: MP-03AA Now from what I was told when I was given the TV, It had been taken to a technician and it was quoted as needing 2 new ICs. When I opened it up they have replaced one board that is soldered to the same board as the ICs and put a new heat sink on one of the ICs. My questions are 1: If the ICs go bad does it usually stop access to the convergence settings 2: Is there some way of accessing the convergence settings 3: How bad are bluestar's generic ICs its $7.99 from bluestar, $30-84 from places here in Australia. Thanks in advance.
|