RCA hd52w59 cant get wires off splitter


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: Projection TV Forum:
RCA hd52w59 cant get wires off splitter

Print Thread

sssssss
New User

May 3, 2014, 3:17 AM

Post #1 of 3 (2191 views)
Shortcut

RCA hd52w59 cant get wires off splitter	Can't Post

I have a dreaded RCA hd52w59. I cant get the wire fron the flyback off the splitter, any suggestions?

jts1957
Veteran

May 3, 2014, 4:56 AM

Post #2 of 3 (2187 views)
Shortcut

Re: [sssssss] RCA hd52w59 cant get wires off splitter [In reply to]	Can't Post

ITC222 Field Service Guide:
6. Remove Anode Lead from HV Splitter (Lead
from IHVT to HV Splitter). Anode Lead can
be removed by pushing in slightly, then twist
and pull. If HV Splitter Assembly needs to
be replaced, remove Anode Leads to each
CRT. Use same procedure to remove leads.
Disconnect Ground lead. Remove Ľ inch
screw securing assembly to bracket

-------------------------
Location: Far, Far Away

sssssss
New User

May 3, 2014, 5:39 AM

Post #3 of 3 (2185 views)
Shortcut

Re: [jts1957] RCA hd52w59 cant get wires off splitter [In reply to]	Can't Post

Thanks, I think I need to replace the flyback transformer It makes a noise when I turn on the TV, I found a shorted diode (dl12) in the board, no bulging caps but what I have been reading I should replace cp114, cp120, cp150, also I think I should replace the C5588 transistor.

Print Thread

Search for (options)

- Page loaded in: 0.15 s on (CGI/1.1)