Did Freeview wreck my TV?


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Did Freeview wreck my TV?

Print Thread

ACERHEAD
New User

Nov 1, 2005, 9:10 PM

Post #1 of 2 (1362 views)
Shortcut

Did Freeview wreck my TV?	Can't Post

I have a Panasonic TX28PL1 & yesterday I connected a Digilogic DSTB1000 freeview box. Everything was working ok but I was trying to manually tune in channel 11 when my tv suddenly went dead. When in standby if you switch off with the remote it comes back on again after a few seconds, its as if its in standby all the time! Unsure

I switched off the power for over an hour bu it didnt work.

Can anyone help?

tbennett
New User

Nov 2, 2005, 2:20 AM

Post #2 of 2 (1356 views)
Shortcut

Re: [ACERHEAD] Did Freeview wreck my TV? [In reply to]	Can't Post

I am not up on this brand of tv but it sounds as if the set is going into shutdown. This is what it should do if you have a problem. I would try disconnecting the box and keep all cables away from tv. If this helps you might have a ground problem with the freebox. Sub. a known good one. Do you have an isolation transformer? Make sure the hot and cold sides of the power cords are in correct with wide side on ground. I don't have any more help for you with out having to use some test eq.

Print Thread

Search for (options)

- Page loaded in: 0.19 s on (CGI/1.1)