TV Forums

Free Games TV Forums

  Main Index FORUM
HOME
Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN
Rules & FAQ RULES
F.A.Q.

Crumbtrail TV Forums: TV Equipment: TV Repair Forum:
KDL52w4100 No signs of life

 

 


Turbosl2
New User

Jun 5, 2018, 9:57 PM

Post #1 of 5 (801 views)
Shortcut
KDL52w4100 No signs of life Can't Post

I have a KDL52w4100 with no blinking lights or any signs of life, however i have 3V at the connector going to the logic board but no power on any of the other wires at this connector. (e.g. 12v UNREG, 12VREG...etc) thoughts? Logic board? Power supply?

I tried a replacement power supply but i dont even get 3V on the standby wire connector going to the logic board. Maybe the replacement power supply is broken.

What are these symptoms of?

Thanks



jts1957
Veteran


Jun 6, 2018, 3:23 AM

Post #2 of 5 (793 views)
Shortcut
Re: [Turbosl2] KDL52w4100 No signs of life [In reply to] Can't Post

BU Board (Main board) is likely if no POWER_ON is not toggling.


-------------------------
Location: Far, Far Away


Turbosl2
New User

Jun 6, 2018, 12:13 PM

Post #3 of 5 (789 views)
Shortcut
Re: [jts1957] KDL52w4100 No signs of life [In reply to] Can't Post

Ok i have a main board on its way. No power ON is toggling. I just wasnt sure because the power supply had a connector that went to the main board and the only power i have is the 3.3 standby


Turbosl2
New User

Jun 6, 2018, 10:07 PM

Post #4 of 5 (778 views)
Shortcut
Re: [jts1957] KDL52w4100 No signs of life [In reply to] Can't Post

Replaced the main board, power came on, then showed 14 red blinks. I unplugged the TV now it just shows green light for a second then nothing again. Maybe the main board is not the correct software? Power supply change was useless


jts1957
Veteran


Jun 6, 2018, 10:42 PM

Post #5 of 5 (776 views)
Shortcut
Re: [Turbosl2] KDL52w4100 No signs of life [In reply to] Can't Post

https://imgur.com/a/7VHFHnC


-------------------------
Location: Far, Far Away

 
 
 


Search for (options) - Page loaded in: 0.21 s on (CGI/1.1)