Magnavox LED Won't turn on


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Magnavox LED Won't turn on

Print Thread

WalltG
New User

May 13, 2016, 5:00 PM

Post #1 of 3 (4242 views)
Shortcut

Magnavox LED Won't turn on	Can't Post

So I have a Magnavox Model 39ME313V/F7 TV. For a few days it wouldn't turn on. I'd unplug for 30 seconds, plug back in and it was fixed. Now it does nothing. The red LED light is on in the front but just won't turn on now. Is it likely just the main board?

jts1957
Veteran

May 13, 2016, 7:19 PM

Post #2 of 3 (4224 views)
Shortcut

Re: [WalltG] Magnavox LED Won't turn on [In reply to]	Can't Post

http://www.shopjimmy.com/...3006-eeprom-only.htm

Or the Power Board.

-------------------------
Location: Far, Far Away

jts1957
Veteran

May 13, 2016, 8:08 PM

Post #3 of 3 (4221 views)
Shortcut

Re: [WalltG] Magnavox LED Won't turn on [In reply to]	Can't Post

IMPORTANT:
These main boards can have multiple failures, in addition to the EEPROM.
If EEPROM replacement does not repair your board, there are likely additional problems.

Symptoms EEPROM replacement MAY fix:
- On screen display is stuck on logo screen
- TV won’t power on with remote or buttons (LED indicator remains same color)
- TV won’t turn on after being off for 30+ minutes
- TV shuts off by itself during channel scan or when switching inputs
- TV turns on and is stuck in color test pattern mode forever
- TV turns on but there is no backlight (LED indicator shows TV is on but there is no image)

-------------------------
Location: Far, Far Away

Print Thread

Search for (options)

- Page loaded in: 0.20 s on (CGI/1.1)