labjr
New User
Apr 22, 2005, 3:49 AM
Post #1 of 1
(4128 views)
Shortcut
|
Mitsubishi WS-65903 convergence problem
|
Can't Post
|
|
The TV is a Mitsubishi 65" wide screen HDTV Projection set. Model WS-65903. It's about 5 years old. The original problem was a blue shadow about 4 inches to the right. Seemed like a typical convergence problem as we'd done a couple of very similar models recently. Never a call back. Upon inspection of the Power Supply /Convergence board, there were the some broken solder joints on the two STK392-040 ICs. I ordered replacements put them in and put the chassis back in the set. The picture looked perfect About a week later I got a call back. Same problem with the blue. I don't see anything apparently wrong in the circuit, but I don't just want to replace the modules, because I'm afraid they'll fail again. Looking for a schematic , service manual etc. Also, if anyone has any suggestions or experience with this set I'd appreciate any help. Regards, Larry
|