Need help on 50" Zenith


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Need help on 50" Zenith

Print Thread

mrbmp
New User

Nov 3, 2004, 6:57 PM

Post #1 of 4 (1416 views)
Shortcut

Need help on 50" Zenith	Can't Post

I need help on a 50" Zenith TV.Its not in front of me but I think it is a R50W46.
It keeps shuting down.
There are about 6 leds on the board, when unit is first plugged in, 5 of the leds light and the 6th comes on when the power button is pressed, if the TV turns on it will stay on for a few seconds to an hour or so then shut off and all the leds go out. If I unplug it for several minutes it will reset and the 5 leds come on again until the power button is pressed, sometimes it shuts off instantly, sometimes it works for an hour or so.
Is there a common problem with this TV?
Ideas where to start?
Thanks for your help

mrbmp
New User

Nov 4, 2004, 11:34 PM

Post #2 of 4 (1407 views)
Shortcut

Re: [mrbmp] Need help on 50" Zenith [In reply to]	Can't Post

Any Ideas???

mrbmp
New User

Nov 5, 2004, 3:00 PM

Post #3 of 4 (1401 views)
Shortcut

Re: [mrbmp] Need help on 50" Zenith [In reply to]	Can't Post

Update,Got a better look at it.
I only guessed at the model number before, I was way off.
Its a Zenith Integ model 1QMB50M90W.
Any one seen this problem before?

mrbmp
New User

Nov 11, 2004, 5:02 PM

Post #4 of 4 (1388 views)
Shortcut

Re: [mrbmp] Need help on 50" Zenith [In reply to]	Can't Post

Have been told it is the deflection board.
Does this sound right?
Where is this board located in relation to the main board with the A/V jacks?

Where is a good place to buy one of these?

Print Thread

Search for (options)

- Page loaded in: 0.21 s on (CGI/1.1)