Panasonic TXW28R4DP shutdown fault


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Panasonic TXW28R4DP shutdown fault

Print Thread

cfcboy
New User

Oct 4, 2004, 6:56 PM

Post #1 of 2 (1443 views)
Shortcut

Panasonic TXW28R4DP shutdown fault	Can't Post

I get a standby light, I switch the TV on, the screen flashed a blurry white colour for a couple of seconds then the TV switches itself off. Is it the tube and am I destined to go and have to buy a brand new TV? Your help would be greatly appreciated.

mel
Veteran

Oct 4, 2004, 9:51 PM

Post #2 of 2 (1430 views)
Shortcut

Re: [cfcboy] Panasonic TXW28R4DP shutdown fault [In reply to]	Can't Post

Panasonic CRTs are usually very reliable so I doubt that it is your problem. I recently repaired a Panasonic with similar symptoms that had a bad voltage regulator which allowed the high voltage to go to high and this automatically shut down the set. Only a tech with the proper test equipment can say for sure. Meanwhile, you might want to check out www.FreeFlatScreens.com/default.aspx?referer=7509165 for an opportunity to earn a free replacement for this set with a little effort on your part.

Print Thread

Search for (options)

- Page loaded in: 0.21 s on (CGI/1.1)