Phillips 60PP920217f convergance / color issues


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Phillips 60PP920217f convergance / color issues

Print Thread

munger
New User

Feb 21, 2008, 11:23 PM

Post #1 of 3 (203 views)
Shortcut

Phillips 60PP920217f convergance / color issues	Can't Post

Hi,
It is a Phillips 60PP920217F
I had a convergence issue and replaced 2 IC's and 2 resistors that were bad. When I put it back together the convergence was good but the color was washed out. After several long hours we were looking at the PIP and the color looks good there. I re-checked all the connections, they look Ok. It appears the signal splits after the tuner and goes to the pip then back. Any advice on what to look at would be great.
Fogot in the service mode I have 2 errors 17,18 something to do with the IC2 bus.

(This post was edited by munger on Feb 21, 2008, 11:29 PM)

rrobor
Veteran

Feb 22, 2008, 5:56 AM

Post #2 of 3 (195 views)
Shortcut

Re: [munger] Phillips 60PP920217f convergance / color issues [In reply to]	Can't Post

You dont say what the faut register stated before you fitted the ICs. When you repair a fault you should clear the fault register, if you do not. the faults logged have become history faults and not actual faults.

munger
New User

Feb 22, 2008, 8:39 PM

Post #3 of 3 (184 views)
Shortcut

Re: [rrobor] Phillips 60PP920217f convergance / color issues [In reply to]	Can't Post

I'm not sure what errors might have been there before, I clear the errors and these keep coming back.

Print Thread

Search for (options)

Web Design by Web Ideas - Page loaded in: 0.16 s on (CGI/1.1)