Pioneer PRO-100 Covergence, Bad CRT?


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Pioneer PRO-100 Covergence, Bad CRT?

Print Thread

donnarb
New User

Feb 7, 2003, 1:39 PM

Post #1 of 2 (1928 views)
Shortcut

Pioneer PRO-100 Covergence, Bad CRT?	Can't Post

I am having convergence problems. The Green is the target to modify the convergence but the target is skewed to the left on the left side of the screen. The picture is pretty good on the right except for just a couple of white lines that are also related to the green. They dissappear when you cover the green tube. Do you think this is a CRT problem or Something else?

BL_Thompson
TV Repair Authority

Feb 7, 2003, 9:01 PM

Post #2 of 2 (1927 views)
Shortcut

Re: [donnarb] Pioneer PRO-100 Covergence, Bad CRT? [In reply to]	Can't Post

donnarb, it's hard to tell from what you describe, but it sounds like your green geometry is off. Look into horizontal width and centering. I've run across several cases where width/centering will cause a horizontal foldover on one side or the other... this may be the cause of your "white lines".
-----------------------
Bryan Thompson
Spyder Byte Services
Albuquerque, NM

Print Thread

Search for (options)

- Page loaded in: 0.19 s on (CGI/1.1)