RCA Projection


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
RCA Projection

Print Thread

jnyby78
New User

Jan 21, 2009, 8:47 PM

Post #1 of 7 (2862 views)
Shortcut

RCA Projection	Can't Post

Hi all. I was given an RCA projection TV Model# P46732BA Chassis# PTK169PGA. The tv has a curvature issue on the left and right sides of the screen. I did some research and the only thing I could find was that a resistor at R4703 (RCA part# 217655) could be bad. Has anyone repaired this problem or had this problem repaired and found this resistor to be at fault? Just trying to find a second opinion before I go potentially wasting time and money on a set this old. Thanks for any information.

ivtec
User

Jan 22, 2009, 12:29 AM

Post #2 of 7 (2854 views)
Shortcut

Re: [jnyby78] RCA Projection [In reply to]	Can't Post

POOR PINCUSHION
CHECK/REPLACE C4402 (P/N# 214754) AND CR4402 (P/N# 164589 also CR4405.

jnyby78
New User

Jan 22, 2009, 2:56 AM

Post #3 of 7 (2848 views)
Shortcut

Re: [ivtec] RCA Projection [In reply to]	Can't Post

Thanks for the info. What p/n is CR4405? Since these parts are pretty cheap, I'm just going to replace them and hope for the best.

Paulpablo
Enthusiast

Jan 23, 2009, 2:54 AM

Post #4 of 7 (2840 views)
Shortcut

Re: [ivtec] RCA Projection [In reply to]	Can't Post

This the dreaded 169 chassis! There is a power supply kit also for this set that I can't recall at the moment I wish you luck!

ivtec
User

Jan 23, 2009, 4:05 AM

Post #5 of 7 (2832 views)
Shortcut

Re: [jnyby78] RCA Projection [In reply to]	Can't Post

download service manual and it get all the P#.
http://www.eserviceinfo.com/...rchstring=CTC169(PTV)

jnyby78
New User

Jan 28, 2009, 6:32 PM

Post #6 of 7 (2797 views)
Shortcut

Re: [ivtec] RCA Projection [In reply to]	Can't Post

Forgive my ignorance, but is that a direct link to my tv's manual? I tried searching with my model # and nothing came up. Thanks again for all your help.

jnyby78
New User

Jan 29, 2009, 3:06 PM

Post #7 of 7 (2791 views)
Shortcut

Re: [jnyby78] RCA Projection [In reply to]	Can't Post

I downloaded the manual. Thanks very much for the help. I'm just waiting for a couple parts and then I'll let you know how the repair goes.

Print Thread

Search for (options)

- Page loaded in: 0.12 s on (CGI/1.1)