Samsung Code


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Samsung Code

Print Thread

Rossly
New User

Apr 7, 2005, 11:37 AM

Post #1 of 4 (2114 views)
Shortcut

Samsung Code	Can't Post

New to this process so forgive me. I don't know what this adjusting is called, it is the one with the vertical and horizontal lines and you can align the colors. I did some adjusting which was poor and need to do more but I have lost the remote control code. Does anyone have it. It isn't the POWER OFF-MUTE-1-8-2-POWER ON.

Thanks. Ross.

mel
Veteran

Apr 7, 2005, 10:03 PM

Post #2 of 4 (2112 views)
Shortcut

Re: [Rossly] Samsung Code [In reply to]	Can't Post

Adjusting the convergence is normally done by adjusting the magnetic rings on the neck of the CRT. Do not move the front two because the are the purity magnets aand if you mess those up, you may never get it corrected on your own. Actually, this whole procedure is best left to someone with the proper experience and equipment.

Rossly
New User

Apr 8, 2005, 12:13 AM

Post #3 of 4 (2108 views)
Shortcut

Re: [mel] Samsung Code [In reply to]	Can't Post

I don't want to open the tv. There is a code that you use on the remote and then turn on the tv. It give you the 64 point convergence grid. I am looking for the code to get me to that grid.

mikemaiertv
Enthusiast

Apr 8, 2005, 9:16 PM

Post #4 of 4 (2097 views)
Shortcut

Re: [Rossly] Samsung Code [In reply to]	Can't Post

For projections it's with the set on,,, mute 1-8-3
Mike Owens Owner Competition TV Spokane WA.

Print Thread

Search for (options)

- Page loaded in: 0.22 s on (CGI/1.1)