TV Forums

Free Games TV Forums

  Main Index FORUM
HOME
Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN
Rules & FAQ RULES
F.A.Q.

Crumbtrail TV Forums: TV Equipment: TV Repair Forum:
Samsung Plasma FP-T5094W will not power on?

 

 


ucsutah
New User

Feb 25, 2013, 8:37 PM

Post #1 of 10 (2729 views)
Shortcut
Samsung Plasma FP-T5094W will not power on? Can't Post

Hi,

I have had a Samsung Plasma FP-T5094W for about 4 years now and for about 2 or 3 months i have been having problems with it with no power. I figured out the problem it was a fuse that was blown on the power supply (BN44-00175A). Its the fuse just above the AC Power Input. I replace that fuse and it works for about a month and then it blows again. I tried to find a service manual for this TV but didn't have any luck. I checked all the caps and they seem to be fine. Any easy suggestions i should try first? I can just replace the fuse each time but its just a temporary fix.

thanks for your help



74f100
Enthusiast

Feb 26, 2013, 3:06 AM

Post #2 of 10 (2716 views)
Shortcut
Re: [ucsutah] Samsung Plasma FP-T5094W will not power on? [In reply to] Can't Post

See if the fuse holder is dis-colored. If so, replace it.

That is a fairly common problem with those (fuse holder overheating).

Good luck,
Jim
HDMI not working



ucsutah
New User

Feb 26, 2013, 4:11 PM

Post #3 of 10 (2705 views)
Shortcut
Re: [74f100] Samsung Plasma FP-T5094W will not power on? [In reply to] Can't Post

thanks for the reply, i think your right it definately could be the fuse holder because it is discolored and a little bit melted looking at it closely.

Where can i buy a fuse holder for this board?


74f100
Enthusiast

Feb 28, 2013, 1:01 AM

Post #4 of 10 (2685 views)
Shortcut
Re: [ucsutah] Samsung Plasma FP-T5094W will not power on? [In reply to] Can't Post

Look at any electronics parts supplier. Radio Shack might even have them.
HDMI not working



AspiringDIY
New User

Jan 2, 2019, 7:55 PM

Post #5 of 10 (1264 views)
Shortcut
Re: [74f100] Samsung Plasma FP-T5094W will not power on? [In reply to] Can't Post

My fuse holder recently melted due to poor contacts. I cant find any replacement parts and part store customer service for Samsung isnt much help. They said I need a new power board when in fact I know I just need a new holder for 250v 12a slow burn fuse. My question is, does it matter what holder I buy? Its a 5mm x 20mm fuse. I dont know where to go from here. Any help would be greatly appreciated.


jts1957
Veteran


Jan 3, 2019, 5:28 PM

Post #6 of 10 (1252 views)
Shortcut
Re: [AspiringDIY] Samsung Plasma FP-T5094W will not power on? [In reply to] Can't Post

No. As long as fuse fits and contacts can handle current rating.

Hard-wired with shrink tubing should also work.


-------------------------
Location: Far, Far Away


AspiringDIY
New User

Jan 3, 2019, 5:52 PM

Post #7 of 10 (1248 views)
Shortcut
Re: [jts1957] Samsung Plasma FP-T5094W will not power on? [In reply to] Can't Post


In Reply To
No. As long as fuse fits and contacts can handle current rating.

Hard-wired with shrink tubing should also work.


Okay, just as not to confuse myself, as long as it holds a 5x20 and rated for 250v 12 a, then I'm good? If so, I'm buying today. Cant believe the parts store wanted me to buy the entire board Crazy


AspiringDIY
New User

Jan 16, 2019, 7:20 PM

Post #8 of 10 (1179 views)
Shortcut
Re: [AspiringDIY] Samsung Plasma FP-T5094W will not power on? [In reply to] Can't Post


In Reply To

In Reply To
No. As long as fuse fits and contacts can handle current rating.

Hard-wired with shrink tubing should also work.


Okay, just as not to confuse myself, as long as it holds a 5x20 and rated for 250v 12 a, then I'm good? If so, I'm buying today. Cant believe the parts store wanted me to buy the entire board Crazy


Could someone link the part I should use or a site they prefer? I'm still having some trouble finding exactly what I'm looking for


jts1957
Veteran


Jan 17, 2019, 9:12 PM

Post #9 of 10 (1172 views)
Shortcut
Re: [AspiringDIY] Samsung Plasma FP-T5094W will not power on? [In reply to] Can't Post

Hint Hint



View it quickly, before it expires. Sly


-------------------------
Location: Far, Far Away

(This post was edited by jts1957 on Jan 22, 2019, 8:20 PM)


AspiringDIY
New User

Jan 22, 2019, 6:47 PM

Post #10 of 10 (1131 views)
Shortcut
Re: [jts1957] Samsung Plasma FP-T5094W will not power on? [In reply to] Can't Post

That link/image is broken. Crazy

 
 
 


Search for (options) - Page loaded in: 0.24 s on (CGI/1.1)