Sharp 27E-S50


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Sharp 27E-S50

Print Thread

John_a
New User

Aug 10, 2007, 4:50 PM

Post #1 of 11 (1811 views)
Shortcut

Sharp 27E-S50	Can't Post

I have a 27" Sharp Tv that started out by shuting the picture and sound off, i wld turn it off for a couple of minutes turn it on again and it wld work, now it doesnt turn on at all. Can anybody help me with this problem. Model no. 27E-S50, Than you J. Alejandro

shadetree
Veteran

Aug 10, 2007, 7:01 PM

Post #2 of 11 (1803 views)
Shortcut

Re: [John_a] Sharp 27E-S50 [In reply to]	Can't Post

ck the relay for bad solder connection

John_a
New User

Aug 10, 2007, 11:23 PM

Post #3 of 11 (1793 views)
Shortcut

Re: [shadetree] Sharp 27E-S50 [In reply to]	Can't Post

What does the relay look like, and where is it located I.m not tv savy, but im always willing to learn.

mel
Veteran

Aug 11, 2007, 11:33 PM

Post #4 of 11 (1783 views)
Shortcut

Re: [John_a] Sharp 27E-S50 [In reply to]	Can't Post

Just look for bad solder joints around the area where the power cord attaches to the pc board. A bad solder joint will usually look grainy and show a lack of connection between the pad and the component lead.

John_a
New User

Aug 12, 2007, 12:28 AM

Post #5 of 11 (1780 views)
Shortcut

Re: [mel] Sharp 27E-S50 [In reply to]	Can't Post

Thanks guys will look.

Franky
User

Aug 12, 2007, 12:44 AM

Post #6 of 11 (1779 views)
Shortcut

Re: [John_a] Sharp 27E-S50 [In reply to]	Can't Post

You should look at the horizontal drive transformer for bad pin solders joints.

John_a
New User

Aug 12, 2007, 12:46 AM

Post #7 of 11 (1778 views)
Shortcut

Re: [Franky] Sharp 27E-S50 [In reply to]	Can't Post

Thanks Franky.

John_a
New User

Aug 13, 2007, 2:16 PM

Post #8 of 11 (1765 views)
Shortcut

Re: [John_a] Sharp 27E-S50 [In reply to]	Can't Post

Hi Guys I checked for bad soldering only found one but wasnt the problem, any more ideas or suggestions ?

John_a
New User

Aug 19, 2007, 5:37 PM

Post #9 of 11 (1745 views)
Shortcut

Re: [John_a] Sharp 27E-S50 [In reply to]	Can't Post

Well guys you were right it was lack of solder i had a tech look at it and that was the problem i guess im blind as a bat im giving up fixing tv's i want to thank everyone for there help. Thank you John A.

Franky
User

Aug 19, 2007, 11:11 PM

Post #10 of 11 (1741 views)
Shortcut

Re: [John_a] Sharp 27E-S50 [In reply to]	Can't Post

When some one suggests to you to check solder joints you should grab your solder tool and start to touch up solder joints all over the power supply, you don't have to give up tv repair this is an easy repair and cheap too,

John_a
New User

Aug 20, 2007, 1:19 PM

Post #11 of 11 (1733 views)
Shortcut

Re: [Franky] Sharp 27E-S50 [In reply to]	Can't Post

Thanks again, will keep doing or trying. Thank you John A.

Print Thread

Search for (options)

- Page loaded in: 0.12 s on (CGI/1.1)