James_Hardy1979
New User
May 5, 2019, 12:13 PM
Post #1 of 4
(1168 views)
Shortcut
|
Sony Bravia KDL-40EX401 6x Red LED Blinks
|
Can't Post
|
|
Hi Guys, I've taken the back off and checked some of the voltages, they all seem to show the correct voltage initially however they all quickly drop after the splash screen. Standby - 3.3v AU12v - 12v on start TCON-On - 3.3v on start TCON VCC 12v - 12v on start BL-ON - 13v on start BL-ERR - 0.382v From the power board to inverter I have the following. BL-ON - 3.2v on start BL-ERR - 2.9v on start UNREG24v pins 1-5 - 25v on start I've also checked and confirmed there is 12v coming into the T-CON board on start. Any advice as to what needs replacing at all?
|