jus4noles3
New User
Sep 10, 2016, 1:18 PM
Post #1 of 12
(2268 views)
Shortcut
|
Sony NSX32GT1 No Power at all
|
Can't Post
|
|
I am new to TV repair but I think I've done enough research in the past few days to have some basic knowledge of whats going on but wanted to confirm with more experienced people... The TV has no standby light, does nothing when plugged in or power button is pressed, no noises, nothing. I started by checking my power cord I have voltage at the cord outlet to the tv, I have voltage on the board side of the power connector, the fuse is good, i have 3.3 V on the standby prong of the power board main connector which I've read is a pretty good sign that the power board is OK. Is this incorrect? Could it still read 3.3v and have a bad resistor or something? Tried checking all resistors that have a visible ohm value written on them and what I have checked has been good so far (not all have a value on them) The main board is just as expensive nearly as a new television but I like this TV's operating system and dont want to get rid of it. Anything else I can check to try to isolate this issue?
(This post was edited by jus4noles3 on Sep 10, 2016, 2:03 PM)
|