TV Forums

Free Games TV Forums

  Main Index FORUM
HOME 		Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN 		Rules & FAQ RULES
F.A.Q.

Crumbtrail TV Forums: TV Equipment: TV Repair Forum:
TV Clicks But Doesnt Turn On

 
 


thordiddy
New User

Dec 18, 2004, 8:12 AM

Post #1 of 12 (2296 views)
Shortcut
TV Clicks But Doesnt Turn On Can't Post
Okay, so I have a RCA P46732BA Projection TV. It worked fine until last week when it wouldn't turn on and all I would hear was a repeating clicking sound. I opened it up and found that the connection of a diode on the main board was sparking. I replaced the diode, but in doing so removed the HV Splitter wire from the hv block. The diode replacement resolved the sparking issue and I put the hv splitter back into the block and I put the hv splitter back into the block but the television now either repeatedly clicks. My question is whether or not my hv splitter is bad? Something to note is that when I disconnect the hv splitter wire from the block and insulate it to prevent an arc, the sound works fine on the TV.

Any help is greatly appreciated.



Thanks



shadetree
Veteran

Dec 18, 2004, 6:53 PM

Post #2 of 12 (2287 views)
Shortcut
Re: [thordiddy] TV Clicks But Doesnt Turn On [In reply to] Can't Post
sounds like bad splitter unless you didn't get wire in far enough which isn't likely


shadetree
Veteran

Dec 19, 2004, 5:16 PM

Post #3 of 12 (2267 views)
Shortcut
Re: [thordiddy] TV Clicks But Doesnt Turn On [In reply to] Can't Post
you can order splitter from wehaveparts.com have modelno. or ctc no. when ordering


thordiddy
New User

Dec 20, 2004, 4:17 PM

Post #4 of 12 (2250 views)
Shortcut
Re: [shadetree] TV Clicks But Doesnt Turn On [In reply to] Can't Post
Is there a way to check if my HV Splitter is broken? I am not sure if i have the wire connected properly.


shadetree
Veteran

Dec 20, 2004, 6:23 PM

Post #5 of 12 (2245 views)
Shortcut
Re: [thordiddy] TV Clicks But Doesnt Turn On [In reply to] Can't Post
if you push the wire from hi voltage in good and the tv shuts down splitter is bad


thordiddy
New User

Dec 21, 2004, 6:52 AM

Post #6 of 12 (2232 views)
Shortcut
Re: [shadetree] TV Clicks But Doesnt Turn On [In reply to] Can't Post
So would this mean I need a new HV Splitter or a new HW Block? I could only find HV Blocks on ebay.


shadetree
Veteran

Dec 21, 2004, 6:06 PM

Post #7 of 12 (2223 views)
Shortcut
Re: [thordiddy] TV Clicks But Doesnt Turn On [In reply to] Can't Post
same thing but don't order on ebay unless you are sure of part no.


thordiddy
New User

Dec 23, 2004, 9:01 PM

Post #8 of 12 (2191 views)
Shortcut
Re: [shadetree] TV Clicks But Doesnt Turn On [In reply to] Can't Post
Sorry about asking the same question again, but I just want to be sure that this is the part I should purchase. Here is the ebay item http://cgi.ebay.com/...&ssPageName=WD1V . It is a HV Block. I was under the impression that the HV Splitter is broken. Will purchasing this part and replacing it fix the television?



Thanks


shadetree
Veteran

Dec 24, 2004, 1:51 AM

Post #9 of 12 (2177 views)
Shortcut
Re: [thordiddy] TV Clicks But Doesnt Turn On [In reply to] Can't Post
without knowing ctc no.this part no. is not the most common one this is from an older set


shadetree
Veteran

Dec 24, 2004, 1:54 AM

Post #10 of 12 (2176 views)
Shortcut
Re: [shadetree] TV Clicks But Doesnt Turn On [In reply to] Can't Post
if you will supply ctc no. or year made it will help


thordiddy
New User

Jan 2, 2005, 12:58 AM

Post #11 of 12 (2127 views)
Shortcut
Re: [shadetree] TV Clicks But Doesnt Turn On [In reply to] Can't Post
Okay, I got the part and installed it. Now the TV clicks repeatedly, and if I change the channel, I can see the channel number flickering in the top right corner of the screen. This is good progress. Does anybody have any ideas as to what I still have wrong? I am not too sure of how well I installed the wires into the HV block. I just jammed them into the block as far as I could.



Thanks for the help.


thordiddy
New User

Jan 2, 2005, 9:47 PM

Post #12 of 12 (2112 views)
Shortcut
Re: [thordiddy] TV Clicks But Doesnt Turn On [In reply to] Can't Post
Hey guys. I got it working. The problem was the HV Splitter wire which had to be pushed in a little more. Thanks for all of the help. I appreciate it.

 
 
 


Search for (options) - Page loaded in: 0.22 s on (CGI/1.1)