TV Forums

Free Games Games Forums Music Forums TV Forums

  Main Index FORUM
Search Posts SEARCH
Who's Online WHO'S
Log in LOG

Crumbtrail TV Forums: TV Equipment: TV Repair Forum:
VIZIO E400i B-2 won't turn on



Johnny J
New User

Feb 17, 2018, 8:15 AM

Post #1 of 2 (253 views)
VIZIO E400i B-2 won't turn on Can't Post

I posted on the same TV in Mar. of '17 with an intermittent problem of turning itself off, got a suggestion that the IC relies on ball-grid' connections to attach it to the board and one or more joints have become intermittent with a reference to ShopJimmy for a main board which I ordered and never had another problem until the other night when it went off and wouldn't come back on, so I installed the main board and nothing but a momentary power light then fades off. I have correct stand by voltage and other pins on power supply wanting 12 volts, which is there for a couple of seconds, I don't know what ACDET or PSON pins are, I don't know how to properly check power supply I wasn't smart enough at the time to by all 3 boards when I had the chance. Help Please Thanks

Johnny J
New User

Feb 24, 2018, 1:34 AM

Post #2 of 2 (218 views)
Re: [Johnny J] VIZIO E400i B-2 won't turn on REPAIRED [In reply to] Can't Post

If you shop a ShopJimmy's and can get all the boards for your TV, buy them it will save time. I replaced the power board and done

Thanks to all the looked.


Search for (options) - Page loaded in: 0.22 s on (CGI/1.1)