mel
Veteran
Mar 30, 2005, 2:35 AM
Post #2 of 2
(1659 views)
Shortcut
|
Re: [pecko] broken cable/antenna connector on sharp model 27n-s100
[In reply to]
|
Can't Post
|
|
If the center connector broke out cleanly from the inner board, it can be replaced with a little solder and patience. Otherwise, you will have to get a new one and again use a little solder and patience. It seems this is a common occurance. You might also want to check out www.FreeFlatScreens.com/?r=10948674 for an opportunity to earn a free replacement for this set with a little effort on your part.
|