TV Forums

Free Games TV Forums

  Main Index FORUM
HOME
Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN
Rules & FAQ RULES
F.A.Q.

Crumbtrail TV Forums: TV Equipment: VCR Repair Forum:
Sharp VC-A565U - need channel 3-4 procedure

 

 


322buick
New User

Jul 22, 2012, 12:15 PM

Post #1 of 3 (2766 views)
Shortcut
Sharp VC-A565U - need channel 3-4 procedure Can't Post

Good morning,
Just picked up this used Sharp VC-A565U and it works fine BUT no manual. All I need is the procedure to switch the output from channel 3 to 4. There is no switch on the back and holding in on the unit's "play" button 3-5 seconds [Funai products procedure] does not work either.
Many thanks,
Mike


(This post was edited by 322buick on Jul 22, 2012, 12:17 PM)



jts1957
Veteran


Jul 22, 2012, 5:02 PM

Post #2 of 3 (2759 views)
Shortcut
Re: [322buick] Sharp VC-A565U - need channel 3-4 procedure [In reply to] Can't Post

As far as I'm aware ALL Sharp VCRs were made by Sharp.
Page 11 of the Owner's Manual:
http://www.manuals365.com/...65u-h965u_om_gb.html


-------------------------
Location: Far, Far Away


322buick
New User

Jul 22, 2012, 9:39 PM

Post #3 of 3 (2756 views)
Shortcut
Re: [jts1957] Sharp VC-A565U - need channel 3-4 procedure [In reply to] Can't Post

jts1957,
Thanks soooooo much for the help. It made all the difference.
Have a great week & T'care,
Mike
P.S. I knew it wasn't a Funai. That's just the only other procedure I know other than a manual switch at the rear.

 
 
 


Search for (options) - Page loaded in: 0.14 s on (CGI/1.1)