Sanyo DVM400 Also


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: DVD Repair Forum:
Sanyo DVM400 Also

Print Thread

combatdrv
New User

Jan 15, 2010, 4:58 AM

Post #1 of 8 (2053 views)
Shortcut

Sanyo DVM400 Also	Can't Post

It never says no disk,but it just keeps on scanning the disk. At times I re clean the disk and then it reads it. Any suggestions out there

jts1957
Veteran

Jan 15, 2010, 6:19 AM

Post #2 of 8 (2051 views)
Shortcut

Re: [combatdrv] Sanyo DVM400 Also [In reply to]	Can't Post

Try cleaning the LENS. Smile

-------------------------
Location: Far, Far Away

techchris
Veteran

Jan 15, 2010, 11:39 AM

Post #3 of 8 (2049 views)
Shortcut

Re: [combatdrv] Sanyo DVM400 Also [In reply to]	Can't Post

if cleaning does not work,the laser is probably on it's way out.

combatdrv
New User

Jan 15, 2010, 8:48 PM

Post #4 of 8 (2035 views)
Shortcut

Re: [techchris] Sanyo DVM400 Also [In reply to]	Can't Post

Chris thanks for responding.. My question is this. the spindle motor that brings the laser to the disk. Has stop working could the laser also be not working too. So in that case does both parts need to be replaced or just the spindle motor? Everything else inside is fine cables are in very good condition..

techchris
Veteran

Jan 15, 2010, 10:36 PM

Post #5 of 8 (2033 views)
Shortcut

Re: [combatdrv] Sanyo DVM400 Also [In reply to]	Can't Post

you will probably find the motor and laser are supplied as one unit thus making the repair so expensive as to be not worth it.

jts1957
Veteran

Jan 15, 2010, 11:47 PM

Post #6 of 8 (2031 views)
Shortcut

Re: [combatdrv] Sanyo DVM400 Also [In reply to]	Can't Post

Spindle motor's only job is to spin the disc.
Sled motor moves laser assembly. Wink

-------------------------
Location: Far, Far Away

combatdrv
New User

Jan 16, 2010, 5:51 AM

Post #7 of 8 (2028 views)
Shortcut

Re: [jts1957] Sanyo DVM400 Also [In reply to]	Can't Post

Can I ask you this when I opened up the Player. In the carriage when the laser goes up to read the disk and it spins. The spinning part is what stopped thats called the sled motor? not the spindle

jts1957
Veteran

Jan 16, 2010, 7:52 PM

Post #8 of 8 (2027 views)
Shortcut

Re: [combatdrv] Sanyo DVM400 Also [In reply to]	Can't Post

The lens goes up and down (usually tries three times) as the spindle motor spins the disc. The sled will move from the center of the disc outwards towards the edge as it tries to find the TOC (table of contents). Smile

-------------------------
Location: Far, Far Away

Print Thread

Search for (options)

- Page loaded in: 0.15 s on (CGI/1.1)