BenQ monitor psu, cap identification


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: LCD TV Forum:
BenQ monitor psu, cap identification

Print Thread

Schottky
New User

Dec 3, 2016, 6:02 PM

Post #1 of 8 (1859 views)
Shortcut

BenQ monitor psu, cap identification	Can't Post

The monitor in my workshop stopped working, so i'd thought i'd investigate why, no power light, so i suspected the psu.
Once removed i found IC601 had blown a leg, the diode D601 had fried and there are signs of burning to capacitor C609. its a 102J (1000pf)
What i want to know is, what kind of capacitor is it ? To me it looks like a metalized polypropylene. How do i know if it is ?

Regards,

Dave

jts1957
Veteran

Dec 3, 2016, 6:36 PM

Post #2 of 8 (1851 views)
Shortcut

Re: [Schottky] BenQ monitor psu, cap identification [In reply to]	Can't Post

Look it up in it's service manual?

Post a picture?
Unimpressed

-------------------------
Location: Far, Far Away

Schottky
New User

Dec 3, 2016, 7:02 PM

Post #3 of 8 (1846 views)
Shortcut

Re: [jts1957] BenQ monitor psu, cap identification [In reply to]	Can't Post

Hi, i dont have a service manual for it, i have taken a pic heres a link to the pic..
http://pinx.me.uk/wp-content/uploads/2016/12/Benq_psu.jpg

(This post was edited by Schottky on Dec 3, 2016, 7:31 PM)

jts1957
Veteran

Dec 3, 2016, 7:57 PM

Post #4 of 8 (1828 views)
Shortcut

Re: [Schottky] BenQ monitor psu, cap identification [In reply to]	Can't Post

Identifying info off the board or the back of unit might allow others to search for info.

-------------------------
Location: Far, Far Away

Schottky
New User

Dec 4, 2016, 5:54 PM

Post #5 of 8 (1810 views)
Shortcut

Re: [jts1957] BenQ monitor psu, cap identification [In reply to]	Can't Post

Thanks for replying,
The model ID is ET-0027-B and the type is G2420HDBL it was manufactured in Oct 2011, i found a service manual on line, but it doesnt have a component parts list on it
Looking at the schematics all the burnt parts are part of the PWM circuit, except C609, so maybe its not damaged anyway, just showing smoke marks from being near D601

(This post was edited by Schottky on Dec 4, 2016, 6:45 PM)

Schottky
New User

Dec 4, 2016, 6:38 PM

Post #6 of 8 (1806 views)
Shortcut

Re: [Schottky] BenQ monitor psu, cap identification [In reply to]	Can't Post

I also see theres a Zener protected Mosfet at Q601, which is linked to D601 the diode that has burnt, can i take Q601 out of circuit and test it with a DMM like i would any other transistor ?

jts1957
Veteran

Dec 4, 2016, 6:51 PM

Post #7 of 8 (1800 views)
Shortcut

Re: [Schottky] BenQ monitor psu, cap identification [In reply to]	Can't Post

Is possible.

-------------------------
Location: Far, Far Away

Schottky
New User

Dec 18, 2016, 11:10 AM

Post #8 of 8 (1767 views)
Shortcut

Re: [jts1957] BenQ monitor psu, cap identification [In reply to]	Can't Post

I have now fixed this monitor, i replaced IC601, D601 and the pcb mount fuse, whilst i was at it i replaced all the radial electrolytics too, with Panasonics..

Print Thread

Search for (options)

- Page loaded in: 0.15 s on (CGI/1.1)