bolob
New User
Sep 11, 2014, 3:11 AM
Post #1 of 1
(2751 views)
Shortcut
|
driving 10 bit LVDS lcd with 8 bit LVDS tv board
|
Can't Post
|
|
Hi experts, My Sharp LC-37GX3W stopped to work, and according to the error code, something is wrong in the main board. I decided to throw out the whole panel and install the universal (v59) tv board. After searching in the internet I found this Sharp has a TCON board with dual channel 10 bit LVDS. (5 differential line + 1 synch line) /channel . However the universal tv board has dual channel 8 bit LVDS interface. My idea was, just simple connect the A-A, B-B, C-C, D-D, Synch-synch, and just leave open the "E" line in the TCON board. Is it possible to make this setup work ? http://i59.tinypic.com/5ue894.jpg http://i57.tinypic.com/9fo1w6.jpg Also, I would appreciate if anybody can tell me how to connect the R/L, U/D, MV_MODE,ROMSEL1,ROMSEL0, TEMP1, TEMP2, TEMP3, PE, OS_EN, SHIP_EN terminals of the Sharp TCON connector. Thanks in advance,
|