Comb Filter


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: Plasma TV Forum:
Comb Filter

Print Thread

RyanMoroz
New User

Nov 28, 2010, 5:27 AM

Post #1 of 3 (1128 views)
Shortcut

Comb Filter	Can't Post

I have a Philips 50 inch Plasma

model: 50pf9431d

I get 7 red blinks for an error code and as common issues state its usually caps on the PWS. However the power supply is fine. I got the tv to turn on by the standard un plug it and plug it in a few times and it does start up. Got into the service menus and show error 46 00 00 00 and teh Defective Module is the Comb Filter. Sorry to sound new at this but what board do i replace for the comb filter... I am figuring its the TCon or the Input but not sure and dont feel like ordering both. Thanks much and please reply if you know

RyanMoroz
New User

Nov 28, 2010, 7:47 AM

Post #2 of 3 (1121 views)
Shortcut

Re: [RyanMoroz] Comb Filter [In reply to]	Can't Post

Also just to ad...

Everything seems fine but the error happens when the VS_on to/from the logic is sent/received. VS_on reads at - 1.003 then kicks in to 3.1 and bam, shuts off and gives 7 red light error.

Not sure if that helps. Also no error occurs when I pull the Power plug for the Logic leaving it everythign else normal. However as the logic runs the LVDS cable to the input liek normal i have no clue still what is the issue.

darstr
User

Dec 2, 2010, 10:50 PM

Post #3 of 3 (1105 views)
Shortcut

Re: [RyanMoroz] Comb Filter [In reply to]	Can't Post

In Reply To

I have a Philips 50 inch Plasma

model: 50pf9431d

I am figuring its the TCon

Good luck getting a T-con board for a Plasma. They don't have them. Cool

Print Thread

Search for (options)

- Page loaded in: 0.16 s on (CGI/1.1)