tamper
New User
Aug 26, 2013, 8:51 PM
Post #1 of 5
(2151 views)
Shortcut
|
Phillips 42PF7320/10 no picture
|
Can't Post
|
|
hi chaps need a bit off help here Phillips 42PF7320/10 fault is the green set light comes on on power up the screen lights very did [no picture or menu ] and after 10-20 min the set goes into stand by red led NONE OF THE LED FLASH AT ANY TIME. now i seen this Power supply repair online and I changed caps C8060 and C8059 3300 uF@ 10v ALSO 1 M Ohm RESISTOR R8094 still the same apart from if I keep turning the power off and on I will get a split second of a picture on the set and then it stays the same green light on steady no flashing and a dime lit backlight screen no picture, can and shed some light on this or even a picture for me :lease: thanks chaps ps a manual and drawing for the 42PF7320/10 would be nice if some kind sole would post them
|