royp4
New User
Aug 27, 2003, 7:27 PM
Post #1 of 1
(2255 views)
Shortcut
|
Pioneer SD-P5193-K Convergence problem
|
Can't Post
|
|
Hi all, I have a Pioneer SD-P5193-K with a red convergence problem. I have replaced the entire convergence board with a new one from Pioneer, but the problem persists. The red convergence is off in the lower left quadrant and the upper right quadrant, but ok elsewhere. I wonder if I need to access setup via service code, but alas I don't have the code. Any advice in this matter would be most greatly appreciated. Thank you, Roy Parnell
|