the98
User
Oct 21, 2017, 2:09 PM
Post #20 of 127
(6978 views)
Shortcut
|
Re: [jts1957] JVC HR-D190EN doens't take tape
[In reply to]
|
Can't Post
|
|
I'm sorry I didn't answer the questions, but since you had me testing some voltages earlier, and I commented that I had resolder some connections, I thought there was no need. So yes, I have an iron, multimeter, and I can get and external power supply from an old PC to get the voltages. The thing about the section 1.3 is that I'm not sure where to locate the control cam, cam bracket. Maybe you circle them for me, like you did before. To clean the mode switch, I followed the instructions from a YouTube video: https://www.youtube.com/watch?v=Xul_LFZ0kes Desoldered the pins of the MS, unscrew some screws, and release without a complete disassembly. Opened it up, cleaned with some q-tips and alcohol, and then gently scraped the metal connections with a screwdriver. UPDATE: Checked some alignments. I don't know if I'm doing it right, but there are two of them that don't align. I'm not sure, so I've uploaded a video: https://youtu.be/1iwDkDOKpGQ
(This post was edited by the98 on Oct 21, 2017, 7:29 PM)
|