TV Forums

Free Games TV Forums

  Main Index FORUM
HOME 		Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN 		Rules & FAQ RULES
F.A.Q.

Crumbtrail TV Forums: TV Equipment: VCR Repair Forum:
Panasonic PV-V4522 Playback Problem

 
 


Olds
New User

Oct 11, 2005, 8:11 AM

Post #1 of 2 (2118 views)
Shortcut
Panasonic PV-V4522 Playback Problem Can't Post
On playback there is white horizontal distorsion line about 1/4 inch thick at the top and bottom all the way across.
On factory recorded tapes and VCR recorded.
When a tape is recorded on this VCR and played back on a good VCR there is a 1 inch horizontal line all the way across, about 1 inch above the bottom, but it has vertical lines running up and down inside the line.
Adjusting tracking does not stop it. Would this be in the power supply or Vertical section?
Thanks



denonjapan
Veteran

Oct 20, 2005, 11:29 PM

Post #2 of 2 (2097 views)
Shortcut
Re: [Olds] Panasonic PV-V4522 Playback Problem [In reply to] Can't Post
video heads cleaning / I was gonna say: replace the whole video drum, but your explanation states picture still visible from the recording and playing. therefore, it needs to be clean with wet solution, cotton swab, blow dryer " just be careful if u do it yourself. You may worn the heads entirely.

denonjapan

made in japan

 
 
 


Search for (options) - Page loaded in: 0.14 s on (CGI/1.1)