Sony kv-36hs510 need help see update at bottom


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Sony kv-36hs510 need help see update at bottom

1 2

View All

Print Thread

gilbio
New User

May 13, 2010, 2:01 PM

Post #1 of 28 (7833 views)
Shortcut

Sony kv-36hs510 need help see update at bottom	Can't Post

This set is my sons. need service manual model kv-36hs510.Set is sometimes hard to turn on hits power and can hear relay click on then off and most of the time it will stay on.any help would be great.
thanks
E-MAIL gilbio@sbcglobal.net
gil low retired
g l electronics
appleton,wi

(This post was edited by gilbio on May 15, 2010, 12:01 PM)

Ron.M
Veteran

May 13, 2010, 6:53 PM

Post #2 of 28 (7827 views)
Shortcut

Re: [gilbio] Sony kv-36hs510 need help [In reply to]	Can't Post

gilbio;....

If you Googled "Free Sony kv-36hs510 Service Manual" with quotes , you'd have found;=>...

http://www.eserviceinfo.com/...Sony_KV-32HS510.html

At the top it says;=>.. File name; KV-32HS510.part13.rar
Go down to;=>... Multipart: 0 1 2 3 4 5 6 7 8 9 10 11 12
& click on "0" (= Part #1)
OR the "0" above....Takes you right to it....
Then click on "1" , download that , etc ,etc.....

There are 13 parts to this manual....
Each one is about 1.5 MBs....
It's an .rar file....
You will need an Unzipper to open the files....
I reccommend 7-Zip...It's FREE & easy to use....
And it works for .rar files....
Do NOT open till you have ALL 13 parts downloaded....

GOOD LUCK......

Later....Ron.M.... Cool

....

PS:....You're Welcome..... Sly

...
Veteran & Retired TV technician

PrinceBytore
New User

May 13, 2010, 8:49 PM

Post #3 of 28 (7821 views)
Shortcut

Re: [Ron.M] Sony kv-36hs510 need help [In reply to]	Can't Post

http://www.tv-forums.com/...gi?post=64947;#64947

Ron.M
Veteran

May 13, 2010, 9:10 PM

Post #4 of 28 (7817 views)
Shortcut

Re: [PrinceBytore] Sony kv-36hs510 need help [In reply to]	Can't Post

PrinceBytore;.....

Just what is this for ????....

http://www.tv-forums.com/...gi?post=64947;#64947

I fail to see ANY relevence to the issue at hand.....
In other words , what the HELL does soldering have to do
with a request for a service manual ????....

Later....Ron.M..... Cool

.....
Veteran & Retired TV technician

PrinceBytore
New User

May 13, 2010, 9:34 PM

Post #5 of 28 (7812 views)
Shortcut

Re: [Ron.M] Sony kv-36hs510 need help [In reply to]	Can't Post

Obviously you're an idiot who failed to read the whole thread. Both TVs have the same well documented start issues with the same faulty ICs that I went into some detail in explaining how to replace by what means. Soldering!! Why don't you read the post before you ask stupid questions you ignorant old fool.

(This post was edited by PrinceBytore on May 13, 2010, 9:39 PM)

Ron.M
Veteran

May 13, 2010, 10:19 PM

Post #6 of 28 (7805 views)
Shortcut

PrinceBytore....<<<..OMG....Another JERK !!! [In reply to]	Can't Post

PrinceBytore;....

Listen Genius;...
That link went to a post that said this;>....

Quote

""Great!! But since you are buying soldering equipment I recommend watching this also ....""""

IF you want someone to read the WHOLE thread then post this;=>...

http://www.tv-forums.com/...cgi?post=64473#64473

Quote

Both TVs have the same well documented start issues with the same faulty ICs that I went into some detail in explaining how to replace by what means.

WONDERFUL !!!!....I gave him part of what he wanted....
YOU instead post a link to a post that takes you to YouTube video about soldering....
NOT ONE WORD about those ICs...NOT ONE G.D. WORD !!!!....
You must think we are psycics & can read minds....
You ARE the one that's ignorant....

YOUR WORDS:=>....

Quote

Why don't you read the post (<<<<NOTE; "post" NOT "thread" !!!) before you ask stupid questions you ignorant old fool.

BEFORE you get your shorts in a snit & start calling other people (me included) names etc , it'd be a good idea to clean up your own act...
First , I'd reccommend you learn the English language a little better....& HOW to use it....

Later....Ron.M.... Cool

....
Veteran & Retired TV technician

(This post was edited by Ron.M on May 13, 2010, 10:21 PM)

PrinceBytore
New User

May 13, 2010, 10:42 PM

Post #7 of 28 (7797 views)
Shortcut

Re: [gilbio] Sony kv-36hs510 need help [In reply to]	Can't Post

Good luck with your sons TV.

gilbio
New User

May 13, 2010, 11:00 PM

Post #8 of 28 (7793 views)
Shortcut

Re: [Ron.M] Sony kv-36hs510 need help [In reply to]	Can't Post

Ron thanks for manual info. just trying to fine out what the problem is too. Son said you push power and you can hear relay click and then shut off if you hit power enough tv will come on and stay on.he lives far away and was trying to get a heads up on the problem.
I too am retired
thanks to all who can help
gil
gil low retired
g l electronics
appleton,wi

jts1957
Veteran

May 14, 2010, 1:42 AM

Post #9 of 28 (7785 views)
Shortcut

Re: [Ron.M] PrinceBytore....<<<..OMG....Another JERK !!! [In reply to]	Can't Post

Easy there Ron. Watch that blood pressure. Weekends almost here. Smile

-------------------------
Location: Far, Far Away

Ron.M
Veteran

May 15, 2010, 12:24 AM

Post #10 of 28 (7763 views)
Shortcut

gilbio , jts1957 , etc [In reply to]	Can't Post

gilbio;....

1st;...
You're welcome.....I hope the manual helps.....
In fairness , I believe that "PrinceBytore" meant well , but went about it the wrong way....
He could have put some more info in his post instead of just a link....
But that's history now....
GOOD LUCK with your son's TV....
Have a GREAT day & weekend.......

jts1957;.....

Quote

Easy there Ron. Watch that blood pressure. Weekends almost here. Smile

The last person that said that to me is no longer posting on this forum.........
Please don't follow in "rxxxxr's" shoes......
As I told him , when I sit in front of this monitor & type this OR any other comments , my blood pressure is PERFECTLY NORMAL !!!!....

Just for the heck of it , I noticed who went away with his tail between his legs whimpering....
Didn't have the cajones to admit any mistakes on his part........
VERY immature........

jts....Have a GREAT day & weekend........

Later....Ron.M........

Veteran & Retired TV technician

(This post was edited by Ron.M on May 15, 2010, 12:26 AM)

mel
Veteran

May 15, 2010, 2:26 AM

Post #11 of 28 (7757 views)
Shortcut

Re: [gilbio] Sony kv-36hs510 need help [In reply to]	Can't Post

Does the standby light blink when it shuts down and if so, how many times? Shut down in older Sonys is often caused by IK shutdown due to an aging CRT and can generally be solved temporarily by turning up the scrreen voltage.

PrinceBytore
New User

May 15, 2010, 5:06 AM

Post #12 of 28 (7750 views)
Shortcut

Re: [mel] Sony kv-36hs510 need help [In reply to]	Can't Post

95% of start up issues with these sets are caused by two 18 pin ICs on the "D" board. They are labeled IC8002 and IC6501. They are both the same Shindengen MCZ3001D chips, and can be bought on E-Bay for about $10.00 US for the pair with sockets. When replacing these please note the orientation of the notch on the end of the chips so you don't install the new ones backwards. Also take note that 2 of the pins are not soldered.

gilbio
New User

May 15, 2010, 12:00 PM

Post #13 of 28 (7739 views)
Shortcut

Re: [mel] Sony kv-36hs510 need help update 5-15-10 [In reply to]	Can't Post

Ron.M
Veteran

May 15, 2010, 8:59 PM

Post #14 of 28 (7728 views)
Shortcut

PrinceBytore;....CONGRATS !!! [In reply to]	Can't Post

PrinceBytore;.....

Sincere CONGRATULATIONS on a Decent post...
Had you posted this one instead of just a link , you & I would not have had that "discussion"....

Quote

In fairness , I jump on peoples butt when they obviously screw up....
I also compliment them when they learn from their mistake....
For this post , I say;=>....

......& KEEP it up !!!

Later....Ron.M.... Cool

....
Veteran & Retired TV technician

jts1957
Veteran

May 15, 2010, 9:33 PM

Post #15 of 28 (7724 views)
Shortcut

Re: [gilbio] Sony kv-36hs510 need help update 5-15-10 [In reply to]	Can't Post

Quote

P.S. whould those IC,s still be the answer?

YES!

-------------------------
Location: Far, Far Away

Ron.M
Veteran

Jun 9, 2010, 6:09 PM

Post #16 of 28 (7660 views)
Shortcut

Re: [gilbio] Sony kv-36hs510 need help update 5-15-10 [In reply to]	Can't Post

gilbio;....

1st off , you're welcome....
2nd;=>....
A little "Forum Etiquette" here...
IMHO , I don't see any reason to start another thread for the same TV &/or problem;=>...

http://www.tv-forums.com/...cgi?post=74330#74330

My suggestion would be to copy that post & paste it here....
Then go back & delete the post in the new thread...
You will still be seen in the same location....

SORRY to hear about your son....
I wish him (& you) the VERY BEST....

As for the TV;=>...

If you downloaded the manual , check what 3 blinks mean....

GOOD LUCK.... Sly

.....

Later....Ron.M.... Cool

.....
Veteran & Retired TV technician

(This post was edited by Ron.M on Jun 13, 2010, 10:24 PM)

gilbio
New User

Jun 9, 2010, 6:19 PM

Post #17 of 28 (7653 views)
Shortcut

Re: [Ron.M] Sony kv-36hs510 need help update 5-15-10 [In reply to]	Can't Post

Thanks, To all that are helping.Yes my son said when you push power on it will click on and then off and red light will flash 6 times.But sometimes it will work just fine .Plan on going to visit him in acouple of weeks as he lives far away.
thanks for any help i can get as would like to know what to bring to repair set.
P.S. whould those IC,s still be the answer?
update june 9 2010
First off would like to again thank ron.m,princebytore andjts1957 for all there help.Made the trip down to my sons on week-end only to fine out he will be put on heart transplant list.Okay installed sockets,installed chips checked all connections checked double checked.plugged tv in and pushed power button on sparked by pins 1&2 and did smell some burning.Now it flashing 3 times instead of 6had to get back home pulled "D" board as for got cap tester is there anything eles that could be problem?at a loss as sony was never my faveroite tv to work on.
Thanks to all that helped
Gil
gil low retired
g l electronics
appleton,wi

gilbio
New User

Jun 9, 2010, 6:30 PM

Post #18 of 28 (7649 views)
Shortcut

Re: [gilbio] Sony kv-36hs510 need help update 5-15-10 [In reply to]	Can't Post

Thanks ron for getting me in the right place with my post.sounds like a problem with 5volts
gil low retired
g l electronics
appleton,wi

Ron.M
Veteran

Jun 9, 2010, 7:03 PM

Post #19 of 28 (7643 views)
Shortcut

Re: [gilbio] Sony kv-36hs510 need help update 5-15-10 [In reply to]	Can't Post

gilbio;.....
I don't have the manual downloaded...
So if you need any further help from me , I'll have to download the manual....
That will take me about 1 hour as I'm on dial-up....
From what you said about the arcing/sparking , I think you'll have more than a 5 volt problem....
Let me know if I can be of further help....
BTW:...Sony is not my favorite either.... Unsure

....
PS: Formerly resided in the Fox Lake area in Ill.....

GOOD LUCK.... Sly

....

Later...Ron.M.... Cool

....
Veteran & Retired TV technician

gilbio
New User

Jun 9, 2010, 7:28 PM

Post #20 of 28 (7635 views)
Shortcut

Re: [gilbio] Sony kv-36hs510 need help see update at bottom [In reply to]	Can't Post

Ron can use all the help i can get.say my son is in silver lake wis.he just lost his job because of his heart at 42 and is on long term disibilty now.that is why iam trying to help.
gil
gil low retired
g l electronics
appleton,wi

Ron.M
Veteran

Jun 9, 2010, 7:50 PM

Post #21 of 28 (7633 views)
Shortcut

Re: [gilbio] Sony kv-36hs510 need help see update at bottom [In reply to]	Can't Post

gilbio;.....

I need a day to download file etc....
Reason is that I'm having a serious car problem & need transportation to store for groceries etc...
& to make time to get manual , look it over etc.....
I WILL get back to you either later today OR tommorrow for sure....

Later.....Ron.M.... Cool

....
Veteran & Retired TV technician

gilbio
New User

Jun 9, 2010, 7:54 PM

Post #22 of 28 (7631 views)
Shortcut

Re: [gilbio] Sony kv-36hs510 need help see update at bottom [In reply to]	Can't Post

Great ! when you get the time not going anywhere
thanks
gil
gil low retired
g l electronics
appleton,wi

Ron.M
Veteran

Jun 10, 2010, 11:07 PM

Post #23 of 28 (7616 views)
Shortcut

Re: [gilbio] Sony kv-36hs510 need help see update at bottom [In reply to]	Can't Post

gilbio;....

1st;...THANKS for waiting....Have the Manual downloaded..... Laugh

....

Your signature looks like you are/were in the TV bussiness....
Is that correct ???...

How did you come to the conclusion that you have a 5 volt problem ????...

I need to know more about that sparking by pins 1 & 2....
Pin 1 normaly has 135 vdc & pin 2 normaly has 15 vdc....
IF there was an arc directly between those 2 pins , the chances are that the IC is gone....
What you smelled burning , God only knows what that is/was ..... Unsure

....
Blinking 3 times means that (According to page 8 in the manual) you have Low B+ Overvoltage...(Reads like an oxymoron !!!)...
That IC6505 is faulty...(D board)
So as you see , this can be a "no-fix" very easily.... Unsure

...

Let me know.... Sly

...

Later...Ron.M.... Cool

....
Veteran & Retired TV technician

gilbio
New User

Jun 10, 2010, 11:55 PM

Post #24 of 28 (7613 views)
Shortcut

Re: [gilbio] Sony kv-36hs510 need help see update at bottom [In reply to]	Can't Post

Ron,yes was in tv but been retired due to health. the 5volts come from service manual that you give me link too.Okay the little spark was ic 6501 between pin 1&2 buy c 6518. did repace ic 6501 and still 3 blinks.also replaced ic8002 the spark was so fast.
hope this helps a little
gil
gil low retired
g l electronics
appleton,wi

gilbio
New User

Jun 13, 2010, 12:49 PM

Post #25 of 28 (7599 views)
Shortcut

Re: [Ron.M] Sony kv-36hs510 need help [In reply to]	Can't Post

Hi Ron, after reading your post again sounds like this tv is a no fix.Would like to know where to start.
would again like to thank you for all your help.
Gil
gil low retired
g l electronics
appleton,wi

1 2

View All

Print Thread

Search for (options)

- Page loaded in: 0.28 s on (CGI/1.1)